LTE RF & RAN Optimization And Troubleshooting Part-1, telecom training

LTE RF & RAN Optimization And Troubleshooting Part-1

////LTE RF & RAN Optimization And Troubleshooting Part-1
LTE RF & RAN Optimization And Troubleshooting Part-1 2018-09-28T14:09:14+05:30

LTE RF & RAN Optimization And Troubleshooting Part-1

LTE RF & RAN Optimization and Troubleshooting Part-I Training is a comprehensive course dealing with the symptoms and causes of field performance issues in LTE Radio Networks.

This course provides insights into RF measurements related to coverage issues and interference to analyze the coverage holes and the overlapping regions in the LTE networks. It also addresses important topics related to LTE optimization like Key Performance Indicators (KPIs), Intra-frequency Handover analysis, review of I-RAT Handover and CSFB.

Initially, students analyze the Radio Network functionality and signaling message flows through UE logs. This then helps them to understand the use of various KPIs and performance reports, to optimize the LTE Radio Network.

This is an instructor-led training with the instructors having a minimum experience of 8-15 years in the Telecom domain. Also, our team of Telecom experts guides the trainees throughout the training duration, by discussing practical troubleshooting use-case scenarios and best possible practices to find and solve them.

This transfer of knowledge further takes place by providing hands-on experience to the trainees using UE-based tools. This further helps them in the retention of this experience.


This advance Telecom training is best suited for Telecom professionals/RF Engineers working on LTE Radio Networks (having a minimum experience of 6 months- 1 year).

Primarily, engineers involved in RAN part of LTE networks benefit the most from this training. This extensive course provides them the opportunity to upgrade their knowledge, technical skills, salary and position in the Telecom Industry.


This is an advance level LTE course. Basic knowledge of LTE like LTE Architecture, LTE Interfaces, signaling process etc. is required.

Prior to this training, we would recommend you to go through our LTE Technology Overview Training (if you are not well-versed with LTE basics).

Previous experience of GSM/UMTS radio network optimization would be useful but not essential.

DURATION: 40 hrs.

FEE: 30k


This training course outline is given below in the form of modules with associated learning objectives:

1. Module

1. Accessibility
2. Retainability
3. Integrity
4. Mobility
5. Availability

After the completion of the modules, you will be able to;

1:Outline the KPIs defined by 3GPP:

  • Accessibility
  • Retainability
  • Mobility
  • Integrity
  • Cell Availability

2. Module
Coverage Analysis

1. LTE Coverage basics
2. Coverage Analysis
3. LTE Coverage Plots

After the completion of the modules, you will be able to;

  1. Define coverage in LTE Context
  2. Explain Coverage Optimization Process
  3. Describe DL Reference signal pollution in the uplink & downlink, and techniques to fix it.
  4. Enumerate key LTE coverage plots

3. Module
Accessibility KPI Analysis

1. System Acquisition
2. Random Access
3. Call Set-up & Signaling

After the completion of the modules, you will be able to;

  1. Outline Call Setup Flow
  2. Describe Random Access Procedure
  3. List parameters & counters that affect performance
  4. Define & Illustrate Access success & failure modes
  5. Outline Methods of resolving access issues

4. Module
Intra-Frequency Hanover Analysis

1. Handover Measurements
2. Handover Preparation
3. Handover Execution

After the completion of the modules, you will be able to;

  1. Review basic call flow of handover
  2. Review measurement control configuration & reporting
  3. List Intra-frequency handover parameters
  4. Illustrate failed handover scenario
  5. Illustrate RRC Re-establishment procedure
  6. Outline counters associated with handover

5. Module
Inter-RAT Handover & CSFB Analysis

1. Idle-Mode Mobility
2. IRAT Handover(Connected Mode)
3. Circuit-Switched Fallback

After the completion of the modules, you will be able to;

  1. Review Idle-mode reselection to UMTS
  2. Review Call flow for UMTS handover
  3. Review Measurement Control configuration & reporting
  4. Outline parameters & counters associated with UMTS IRAT HO
  5. Illustrate CSFB procedure
  6. Outline parameters & counters associated with CSFB
Toggle Sliding Bar Area

New Courses

Contact Info

A-43, Sector -2, Noida, UP

Mobile: +91-9886577992


Recent Posts